Large Wire (LW) Wedge Series

OSG7 Series - 70° V-Groove

OSG7 series is an in-line 70° V-groove design commonly used by most heavy wire bonder manufacturer. design is available for wire size ranging from available for wire sizes ranging from 100 microns to 500 microns (4mils to 20mils).

CKVD Series - 70° V-Groove

Like the OSG7, the CKVD series has a 70° deep V-groove design for Cho-onpa heavy wire bonder. Typically with symmetrical front and back radii around 30% of the wire diameter. Also available with larger back radius to help guide the wire through the groove.

45CK Series - 70° V-Groove with integrated feed hole

The 45CK design has a 70° V-groove with 45° feed hole. This style has symmetrical front and back radius around 50% of the wire diameter. This style is available for wire sizes from 75 microns to 250 microns (3mils to 10mils).

AB16 Series - 60° V-Groove with integrated feed hole

The AB16 design has a 60° V-groove with 45° wire feed. This series is available for wire sizes from 75 microns to 250 microns (3mils to 10mils).

4516 Series - 60° V-Groove with integrated feed hole

The 4516, also known as an L-notch tool, has a 60° V-groove with 45° wire feed. This style is available for wire sizes from 75 microns to 500 microns (3mils to 20mils).

D6 Series - 60° V-Groove with integrated feed hole

The D6 is a typical V-notch tools for heavy wire with a 60° V-groove. This style is available for wire sizes from 75 microns to 250 microns (3mils to 10mils).