Precision Processes
Precision Processes in Mold Making, the finishing of Ceramic Parts, and in customized Carbide and Steel parts
Our large vertical range of manufacture enables us to offer you a product "100% made by SPT". Our ability to control the entire manufacturing process and our state-of-the-art machinery are a key success factor for our outstanding results.
High Performance Milling
Traverse path max.: x = 500 mm, y = 240 mm, z = 360 mm
Spindle speed: 42'000 rotations per minute
Special feature: up to 5 axes simultaneously
Erode Machining
Types of erode machining: Wire EDM, sink EDM and EDM milling
Precision: +/- 0.002 mm
Smallest hole diameter: 0.05 mm
Smallest wire diameter for wire-cut EDM: 0.5 mm
Smallest hole diameter for die-sinking EDM: 0.1 mm
Smallest possible radius for EDM milling: 0.007 mm
Grinding
Grinding types: cylindrical, flat and internal grinding
Grinding materials: steel, carbide and ceramics
Without grinding heel
Surface roughness: N2
Polishing, Lapping & Honing
Polishing, lapping:
Precision: +/- 0.001 mm
Achievable roughness: N1
Grinding:
Smallest hole diameter: 0.1 mm x max. 30 mm
Precision: +/- 0.001 mm in diameter
Achievable roughness: N2
Hard Turning
Turning of material up to a hardness of 70 hrc
Maximum part diameter: 239 mm
Roughness: N3 (Ra of 0.1 µm)
Laser Machining
Processing of various materials such as steel, bronze, and titanium as well as ceramics, sapphire and polymers
Low thermal stress due to femtosecond laser
Tolerances down to 0.1 µm possible
Max. Machining sizes 50 x 50 mm
Roughness: up to max. Ra 0.3 µm possible (N4/N5)